Earn 347 points when you buy me!
This cost-effective access point is perfect for lower-density environments such as retail stores and branch offices.
With the integrated BLE and supporting 802.3af power, the 303 Series APs enable enterprises to improve their work efficiency and productivity with the lowest TCO. When Ethernet drops are not available, VPN tunnels extend remote locations to corporate resources and wireless mesh connections.
The 303 Series campus APs deliver connectivity to environments such as schools, retail branches, warehouses, hotels, and offices, where the environment is cost-sensitive.
Delivers a maximum concurrent data rate of 867 Mbps in the 5GHz band and 300 Mbps in the 2.4GHz band (for an aggregate peak data rate of 1.2Gbps).
ARM automatically assigns channel, width, and power settings based on environment and client density. It also provides airtime fairness and ensures that access points stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.
Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 client devices) and up to 300Mbps in the 2.4GHz band (with 2SS/HT40 clients).
The compact Aruba 303 Series AP delivers a maximum concurrent data rate of 867 Mbps in the 5GHz band and 300 Mbps in the 2.4GHz band (for an aggregate peak data rate of 1.2Gbps). Featuring 2x2:2SS, the Aruba 303 is designed for medium device density environments, such as schools, retail branches, warehouses, hotels and enterprise offices, where the environment is cost sensitive.
ThThe 303 Series includes an integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing Meridian and IoT-based location services, asset tracking services, security solutions and IoT sensors. This allows organizations to leverage the AP as an IoT platform, which eliminates the need for an overlay infrastructure and additional IT resources.
Daisy-chain your wired network to connect and power any network device (IP camera, IOT gateway, or even a second Access Point) to the E1 Ethernet port of the AP-303P. Simplify and costreduce the installation of multiple devices by sharing switch ports and cabling.
The Aruba 303 Series Access Points offer a choice of deployment and operating modes to meet your unique management and deployment requirements
| AP-303 | single Ethernet |
| AP type | Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO |
| 2.4GHz radio | Two spatial stream Single User (SU) MIMO for up to 300Mbps wireless data rate to individual 2SS HT40 client devices Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio |
| 5GHz radio | Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2SS VHT80 client devices Two spatial stream Multi User (MU) MIMO for up to 867Mbps wireless data rate to two 1SS MU-MIMO capable client devices simultaneously |
| Supported frequency bands | 2.400 to 2.4835GHz 5.150 to 5.250GHz 5.250 to 5.350GHz 5.470 to 5.725GHz 5.725 to 5.850GHz |
| Available bands and channels | Dependent on configured regulatory domain |
| Supported radio technologies | 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) |
| AP-303 | Internal antenna models |
| Dimensions/weight ( unit without mount bracket) | 150mm (W) x 150mm (D) x 35mm (H) or 5.9" (W) x 5.9" (D) x 1.4" (H) 260g or 9.2oz |
| Dimensions/weight (with shipping) | 190mm (W) x 180mm (D) x 60mm (H) or 7.4" (W) x 7.0" (D) x 2.4" (H) 410g or 14.5oz |
| Operating conditions | Temperature: 0° C to +40° C (+32° F to +104° F) Humidity: 5% to 93% non-condensing |
| Storage conditions | Temperature: -40° C to +70° C (-40° F to +158° F) |
| Mean Time Between Failure (MTBF) | 795khrs (91yrs) at +25C operating temperature |
| FCC/ISED CE Marked RED Directive 2014/53/EU EMC Directive 2014/30/EU Low Voltage Directive 2014/35/EU UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative. |
| Wi-Fi Alliance | CB Scheme Safety, cTUVus UL2043 plenum rating Wi-Fi Alliance certified 802.11a/b/g/n, ac Wi-Fi CERTIFIED™ ac (with wave 2 features) Passpoint® (Release 2) with ArubaOS and Instant 8.3+ |
| AP-303 models | ArubaOS & Aruba InstantOS 8.3.0.0 |
| JZ317A | Aruba AP-303 (EG) Dual 2x2:2 MU-MIMO Radio Internal Antennas Unified Campus AP |
| JZ318A | Aruba AP-303 (IL) Dual 2x2:2 MU-MIMO Radio Internal Antennas Unified Campus AP |
| JZ319A | Aruba AP-303 (JP) Dual 2x2:2 MU-MIMO Radio Internal Antennas Unified Campus AP |
| JZ320A | Aruba AP-303 (RW) Dual 2x2:2 MU-MIMO Radio Internal Antennas Unified Campus AP |
| JZ321A | Aruba AP-303 (US) Dual 2x2:2 MU-MIMO Radio Internal Antennas Unified Campus AP |
| JW045A | AP-220-MNT-C2 Kit with two suspended ceiling grid rail adapters for Interlude and Silhouette style rails |
| JX961A | AP-MNT-CM1 Industrial grade indoor access point metal suspended ceiling rail mount kit |
| JW046A | AP-220-MNT-W1 Flat surface wall/ceiling basic flat surface AP mount kit (black) |
| JW047A | AP-220-MNT-W1W Flat surface wall/ceiling basic flat surface AP mount kit (white) |
| JY705A | AP-200-MNT-W3 Low profile box style secure small flat surface AP mount kit (white) |
| Q9U25A | AP-MNT-W4 White Low Profile Basic AP Flat Surface Mount Kit |
| R6P68A | AP-POE-AFGE 1-Port GbE 802.3af 15.4W midspan injector |
| R3K00A | AP-AC2-12B 12V/48W AC/DC desktop style power adapter with 2.1/5.5mm connector |
| JW627A | PD-3501G-AC 15.4W 802.3af PoE 10/100/1000 Ethernet indoor midspan injector |
| R2X45A | Aruba AP-USB-ZB External USB based Dongle with Zigbee and BLE for AP |
| R2Y09A | Aruba AP-USB-ZB 10-pk External USB based Dongle with Zigbee and BLE for AP |
| R2Y10A | Aruba AP-USB-ZB 50-pk External USB based Dongle with Zigbee and BLE for AP |
